1:PC mask using the Japanese production of pure PC transparent material or creamy scrub material diffusion.

2:AL 6063 (6063-T8 navigational aluminum)

1:Transparent PC cove: ≥ 90%

2:Diffusion mask:

7 #:85% --88%

8 #:85% --85%

10 #:75% --78%

600mm、900mm、1200mm、1500mm 《Can be customized》

1, high transparency, light transmission rate of more than 90%

2, anti UV ultraviolet, the same yellow, not burst

3, high resistance, low temperature of minus 60 degrees high temperature of 160 degrees

4 standard, toughness, anti mechanical shock resistance

5, environmental protection standards, can provide Japan Teijin original factory environmental protection SQS test certificate

6, appearance: no black spots, wireless, ripple

7, the material used: Japan Teijin PC transparent material, extrusion molding

8, aluminum radiator adopts 6063 aviation aluminum

9, packing: double protective film, to prevent surface scratch

1:Salt mist test.

2:High free drop anti cracking test.

3:high and low temperature test.

4:Anti-yellowing in outdoor exposure test.

1:The general problem of the PC cover mostly refers to appearing irregular cracks in the use of the tube lighting, which is mostly caused by chemical substances. The reason is that the prestress of the polycarbonate and BPA of the raw material can produce chemical reaction when they meet chemicals.   

2:In case rise the problem as above, Paying attention to not applying some substances as following:

A:Industrial Thinner

B:Alcohol、

C:Plate washer water

D:The instant glue whose PH≥6.

E:The printing ink on the PCB and the glue on the leds shouldapply materials with the property of un-printing and  volatility.